Guest User | Sign In

Frequently Asked Questions

Setup guide - [WorldNet VoIP] Linksys PAP2NA

The Linksys Phone Adapter enables use of our high-quality feature-rich telephone service through your Internet connection. Just plug it into your home Router or Gateway and use the two standard telephone jacks to connect your existing phones. Each phone jack operates independently, with separate phone service and phone numbers -- like having two phone lines. With WorldNet VoIP, you'll get clear telephone reception, even while using the Internet at the same time for normal data operations.

1. Wiring of PAP2NA

image

2. Connect PAP2NA to Internet Connection.
image

3. Check IP Address of PAP2NA.
You must first determine what IP address it received.
To do this, you need to pick up the phone attached to the Line 1 jack and

dial: **** (four asterisks)
then dial: 110 #

and you will be told the IP address of your device (e.g. 192.168.1.100).

4. Get in Web Interface of PAP2NA. Go to any browser equipped computer on the same network and enter the address:
image

Click Admin Login as illustrated.
image

Click Line 1
Click Switch to advanced View. And Click Line 1.
image

5. Line Setting

Leave default setting except mentioned below.
1) Line Enable : yes
2) NAT settings
a) NAT Keep Alive Enable : yes
3) Proxy and Registration
a) Proxy : auckland.worldnet.co.nz
b) Register expires : 600
c) Proxy Fallback Intvl : 600
4) Subscriber Information
a) Display Name : Phone Number (Including area code without space. e.g., 098801234)
b) User ID : Phone Number
c) Password : The password got from WorldNet
­ Ex> : XVI0942VSKDF
d) Use auth ID : no
5) Supplementary Service Subscription
a) Block CID Serv: no
b) Block ANC Serv: no
c) Cfwd All Serv: no
d) Cfwd Busy Serv: no
e) Cfwd No Ans Serv: no
f) Cfwd Sel Serv: no
g) Cfwd Last Serv: no
h) Block Last Serv: no
i) Accept Last Serv: no
j) DND Serv: no
k) Call Return Serv: no
l) Speed Dial Serv: no
6) Audio Configuration
a) Preferred Codec : G729a
b) Fax Passthru Codec : G711a
c) FAX Passthru Method: ReINVITE
7) Dial Plan
a) Dial Plan : (*xx.|111S0|[2-9]xxxxxxS0|00xx.|02xx.|0[34679]xxxxxxxS0|0508x.|08xx.|09xx.|05xx.|01xx.|11[023456789]xx.)
b) Enable IP Dialing : no

Press Save Settings and you can see following message.
image

6. Regional Configuration
Click Regional in advanced view
image

1) Call Progress Tones
- Dial Tone: 400@-9;30(*/0/1)
- Second Dial Tone: 420@-19,520@-19;10(*/0/1+2)
- Outside Dial Tone: 420@-16;10(*/0/1)
- Prompt Tone: 520@-19,620@-19;10(*/0/1+2)
- Busy Tone: 400@-9;*(.5/.5/1)
- Reorder Tone: 400@-9;15(.25/.25/1+2)
- Off Hook Warning Tone: 400@-10,680@0;*(.125/.125/1+2)
- Ring Back Tone: 400@-19,450@-19;*(.4/.2/1+2,.4/.2/1+2,2/0/0)
- Confirm Tone: 600@-16;1(.25/.25/1)
- SIT1 Tone: 985@-16,1428@-16,1777@-16;20(.380/0/1,.380/0/2,.380/0/3,0/4/0)
- SIT2 Tone: 914@-16,1371@-16,1777@-16;20(.274/0/1,.274/0/2,.380/0/3,0/4/0)
- SIT3 Tone: 914@-16,1371@-16,1777@-16;20(.380/0/1,.380/0/2,.380/0/3,0/4/0)
- SIT4 Tone: 985@-16,1371@-16,1777@-16;20(.380/0/1,.274/0/2,.380/0/3,0/4/0)
- MWI Dial Tone: 400@-19;2(.1/.1/1);28(*/0/1)
- Cfwd Dial Tone: 350@-19,440@-19;2(.2/.2/1+2);10(*/0/1+2)
- Holding Tone: 600@-19;*(.1/.1/1,.1/.1/1,.1/9.5/1)
- Conference Tone: 350@-19;20(.1/.1/1,.1/9.7/1)
- Secure Call Indication Tone: 397@-19,507@-19;15(0/2/0,.2/.1/1,.1/2.1/2)


2) Distinctive Ring Patterns
- Ring1 Cadence: 60(.4/.2,.4/2)
- Ring2 Cadence: 60(.4/.8,.4/14)
- Ring3 Cadence: 60(.8/.4,.8/4)
- Ring4 Cadence: 60(.4/.2,.3/.2,.8/4)
- Ring5 Cadence: 60(.2/.2,.2/.2,.2/.2,1/4)
- Ring6 Cadence: 60(.2/.4,.2/.4,.2/4)
- Ring7 Cadence: 60(.4/.2,.4/.2,.4/4)
- Ring8 Cadence: 60(0.25/9.75)


3) Distinctive Call Waiting Tone Patterns
- CWT1 Cadence: 30(.3/9.7)
- CWT2 Cadence: 30(.1/.1, .1/9.7)
- CWT3 Cadence: 30(.1/.1, .3/.1, .1/9.3)
- CWT4 Cadence: 30(.1/.1,.1/.1,.1/9.5)
- CWT5 Cadence: 30(.3/.1,.1/.1,.3/9.1)
- CWT6 Cadence: 30(.1/.1,.3/.2,.3/9.1)
- CWT7 Cadence: 30(.3/.1,.3/.1,.1/9.1)
- CWT8 Cadence: 2.3(.3/2)


4) Ring and Call Waiting Tone Spec
- Ring Waveform : Sinusoid
- Ring Frequency : 25
- Ring Voltage : 70
- CWT Frequency : 400@-10
- Synchronized Ring : no


5) Miscellaneous
- Set Local Date (mm/dd): Set current month and day
- Set Local Time (HH/mm): Set current hour and minute
- Time Zone : GMT+12
- FXS Port Impedance : 20+8200 - - 120nF
- Daylight Saving Time Rule : start=10/1/7/2;3/15/7/3;save=1
- FXS Port Input Gain : -4
- FXS Port Output Gain : -10
- DTMF Playback Level : 0
- DTMF Playback Length : .1
- Detect ABCD : no
- Playback ABCD : yes
- Caller ID Method : Bellcore(N.Amer,China)
- FXS Port Power Limit : 4

Then, click Save Settings and you can see following message.
image

7. SIP Setting
Click SIP in the top menu.
image
Set NAT Keep Alive Intvl to 60 under NAT Support Parameters menu.

Then, click Save Settings and you can see following message.
image
8. Check Dial-Tone
All configurations are done now. Pick up the phone handset and check if you can hear the dial-tone.

Please Wait!

Please wait... it will take a second!