WorldNet Knowledgebase

| Method: Using a computer for router settings

Step-1. Connect the router

(1) Turn off the modem (ONT)

Note that the modem means the Optical Network Terminal (ONT) device, known as a fibre box.

(2) Connect the modem (ONT) to the router's WAN(Internet) port with an Ethernet cable.

(3) Turn on the modem (ONT), and then wait about 2 minutes for it to restart.

(4) Connect the power adapter to the router and turn on the router.

Step-2. Access the router

Connect your computer to the router using an Ethernet cable and join the router's local area network (LAN) port. The computer must have an Ethernet port.

Step-3. Setup the router

(1) Open a web browser (e.g. Chrome, Safari, Firefox, etc.) and type the default gateway address (e.g. 192.168.20.1).

Note that the computer you use should be connected to the router via Wired (LAN port).

(2) Enter the router admin username and password.

Note that the default username is admin and password is printed on the label on the bottom of the router.

[Basic Setup]

(3) WAN Setup: PPPoE | IPoE | Bridging

(4) VLAN tag: No VLAN Tag | VLAN Tag 10 |Custom VLAN Tag

Step-4. Setup is complete

Step-5. Test internet connection