WorldNet Knowledgebase

| Hyperfibre ONT (Type 110) Image

| Mandatory LEDs for Hyperfibre

LED	Status	Meaning
POWER	Solid Green	The ONT is powered on.
PON	Solid Green	Successfully connected to the Chorus fibre network.
LINK	Solid Green	Optical signal is present and stable.
AUTH	Solid Green	ONT is authenticated and provisioned by the network.
LAN 10G	Solid Green	10 Gigabit Ethernet port is active and connected to your router or device.

| If any of these LEDs are off

LED	Check This
POWER	Ensure the ONT is plugged into power and the socket is working.
PON	Check the fibre cable – it must be securely connected and undamaged.
LINK	Make sure the SFP module is properly inserted and clean.
AUTH	Wait a few minutes after boot; if still off, contact WorldNet.
LAN 10G	Verify Ethernet cable is connected to a compatible 10G port on your router.

| Summary

All 5 red-circled LEDs should be solid green for Hyperfibre service to function properly.

If any are off or blinking, troubleshoot using the table above or escalate to us.

| Reference
https://www.chorus.co.nz/help/ont/hyperfibre-type-110

Last Updated 7 months ago